Avaya BCM 2.0 Programming Guide de l'utilisateur Page 71

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 446
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 70
Configuring Enterprise Edge Resources 71
P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations Guide
To enable or disable any of the buses on the Enterprise Edge system:
1. Under the Resources heading, click the Media Bay Modules key.
Buses02to08aredisplayed.
2. Select the bus you wish to disable.
Information about the bus is displayed and the Configuration menu option is
enabled.
3. On the Configuration menu, select Disable.
The system prompts you to confirm your request.
4. Click the OK button to disable the bus.
Bus
Bus 01 is reserved for the MSC card. Because there is no hardware programming
required for the MSC card, bus 01 is not displayed. You can view and perform
maintenance operations on Bus 01. For more information, see Maintenance on page
259.
For a detailed description of the various Media Bay Modules and proper hardware
configurations, see the Enterprise Edge Installation and Maintenance Guide.
Note: Because the voice over IP (VoIP) functionality resides on the MSC card, it
is not necessary to program any hardware settings for it. The Trunk mode
isautomaticallysettoVoIP for lines001to014. For more information,refer
to Lines on page 108.
To configure a bus type:
1. Choose Resources, Media Bay Modules.
2. Click a Bus (Bus 02 to 07).
Note: Bus 08 is reserved for configuring a data module, which provides a
soft router connection to a remote router. The functionality for this
feature is on the Media Services Card, not in a discrete media bay
module. For information about programming a data module, see
Configuring a data module on page 79.
3. From the Programmed Bus Type list, choose a bus type.
Vue de la page 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 445 446

Commentaires sur ces manuels

Pas de commentaire