Avaya BCM 2.0 Programming Guide de l'utilisateur Page 312

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 446
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 311
312 Troubleshooting your Enterprise Edge system
Enterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01
A redirected line remains busy
A line that has been redirected using Line Redirection may, under some
circumstances, remain busy after a call is over. If this happens, the outgoing line for
the redirection also remains busy. You can clear this kind of hung line only at the
telephone that was used to redirect the line.
Use the following procedure to clear the line:
1. Enter the Button Inquiry feature code (ƒ•‚) at the telephone that
was used to redirect the line.
2. Press the button of the redirected line.
3. Press SHOW or £.
4. Press DROP or .
Both the redirected line and the outgoing line for the redirection should now be
cleared.
Programming is incorrect
The supervision and/or disconnect timer programming for the line do not match the
settings for the line at the central office.
Verify in the Unified manager that your programming for the line matches the
central office settings using the following procedure:
1. Choose Services, Telephony Services, Lines.
2. Select the affected line.
3. Select Trunk/Line data.
The line’s programming data is displayed.
4. Verify that the supervision and disconnect timer programming match the
settings for the line at the central office.
Lines require maintenance session
Lines are still hung after all the above solutions have been investigated or tried out.
For lines that are hung for any other reason, you will have to run a Maintenance
session and disable then re-enable the affected trunk module using the following
procedure:
1. Choose Resources, Media Bay Modules and the bus that the module is on.
Disable the module using the procedure, Disable a module on page 279.
Vue de la page 311
1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 445 446

Commentaires sur ces manuels

Pas de commentaire