
130 Configuring Enterprise Edge Services
Enterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01
DN type
The DN type setting shows only for service type Tie.
6. Select Public or Private DN type.
Call by Call Service routing
The following is an example of a Routing Table containing Call by Call
programming (available in the North America market profile).
Theservice identifier (SID)dependsontheselected service type(forexample, with
NI-2 protocol).
When you select or change a PRI protocol, the Service Type and Service ID fields
automatically clear for each entry in the routing table for that PRI.
Programming the PRI routing table
The dialing plan must be thoroughly planned out in advance before programming
the information into the Enterprise Edge system.
To program the routing table:
1. Choose Services, Telephony Services, Call Routing, Routes.
1. Under Route001, External #:, type a number (up to 24 digits).
Route #
(000-999)
Dial Out
(24 digits)
Use Pool Service Type Service
Identifier
003 PRI-A Public
004 PRI-A FX xxxxx
005 PRI-A Tie xxxxx
006 PRI-B OUTWATS xxx
007 PRI-B Private
008 PRI-B Switched Digital
Note: The public DN lengths are used for all PRI calls except those whose routes use service type
Private or service type Tie with DN Type specified as Private.
Service Type Service Identifier description
Public None
FX Facility Number 1-5 digits
Tie Facility Number 1-5 digits
OUTWATS
a
Optional Band Number 1-3 digits
Private None
Switched Digital None
a. For NI-2, do not program the Carrier Access Code for banded OUTWAT calls. This call may
be rejected.
Commentaires sur ces manuels