Avaya BCM 2.0 Programming Guide de l'utilisateur télécharger pdf (Page 291)

Maintenance 291

P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations Guide

Companion event messages (North American systems only)

Table 1 Event messages

Event message display Cause

Evt:275-3546 S8 (U.S. only) Unable to activate all registered portables. The

system ran out of portable credits. One event is generated per

portable that failed to activate. The repetition of the

corresponding alarm code 59 indicates how many additional

credits must be purchased.

Evt:301-1031 S5 The Base Station (on port 0103 in this case) cannot successfully

receive the data image.

Both radios belonging to the Base Station are disabled. This

may occur if the flash EEPROM is faulty. Two events are

raised: one for the B1 channel radio (as in this case) and another

for the B2 channel radio. A corresponding alarm code 53

occurs.

Evt:302-1031 S5 The Base Station (on port 0103 in this case) cannot be written to

during data transfer.

Both radios belonging to the Base Station are disabled. The

Base Station’s flash EEPROM is faulty. Two events are raised:

one for the B1 channel radio (as in this case) and another for the

B2 channel radio. A corresponding alarm code 53 occurs.

Evt:303-1031 5 The Base Station (on port 0103 in this case) cannot be

synchronized with the other Base Stations in the system.

Both radios belonging to the Base Station are disabled. The

Base Station hardware is faulty. Two events are raised: one for

the B1 channel radio (as in this case) and another for the B2

channel radio. A corresponding alarm code 53 occurs.

Evt:304-1032 A B2 channel radio (radio 2 on port 0103 in this case) cannot be

synchronized with other radios because of system overload.

Evt:305-01032 S5 A B2 channel radio (radio 2 on port 0103 in this case) cannot be

synchronized because the B1 radio was disabled in

maintenance.

Both radios belonging to the Base Station (on port 0103 in this

case) are disabled. The B1 radio must be operational to

synchronize both radios of the Base Station with other radios in

the system. Two events are raised: one for the B1 channel radio

and another for the B2 channel radio. A corresponding alarm

code 53 occurs.

Evt:306-01031 S5 A radio (0103-1 in this case) cannot be synchronized because

there are no B2 channel radios.

Both radios belonging to the Base Station (on port 0103 in this

case) are disabled.Two events are raised: one for the B1 channel

radio in this case) and another for the B2 channel radio. A

corresponding alarm code 53 occurs.

Evt:307-0109100 S5 A recoverable RIM fault has occurred

The RIM is reset. If a link is active when this error occurs, the

link is dropped. The radio (0109-1 in this case) is returned to

service.

1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 445 446

Commentaires sur ces manuels

Pas de commentaire

Avaya BCM 2.0 Programming Guide de l'utilisateur Page 291

Commentaires sur ces manuels

Produits connexes et manuels pour Passerelles/contrôleurs Avaya BCM 2.0 Programming