Avaya BCM 2.0 Programming Guide de l'utilisateur télécharger pdf (Page 153)

Configuring Enterprise Edge Services 153

P0911588 Issue 01 Enterprise Edge 2.0 Programming Operations Guide

Direct dial

The Direct dial settingallows you to diala single system-widedigit to calla specific

telephone, called a direct dial telephone. The most common example of a direct dial

set is a telephone for an operator, a receptionist or an attendant. A total of five direct

dial sets can be programmed on the system.

To configure Direct dial sets:

1. Choose Services, Telephony Services, General Settings, Direct dial.

2. Click on the Direct dial set you want to program (Set 1-Set 5). The Set #

window appears.

Type

3. Choose if the Direct dial set has an Internal or External number or None.

Internal/External#

4. Type the internal or external number that the system automatically dials when

someone enters the direct dial digit. The default number for the Direct dial set

is DN 221.

Facility

If you assign an external number as a direct dial set, you must indicate what line to

use for the call.

5. Select the facility (line) for the external number: Use line:, Pool A to O, Use

prime line, Use routing table.

Link time Allows you to specify the duration of a signal required to access a feature

through a remote system. The Link time depends on the requirements of

the host switching system. For example, to program external dialing

through a Centrex system requires a Link time of 400 ms.

Link is another name for recall or flash.

Values: 100, 200, 300, 400, 500, 600, 700, 800, 900 or 1000

milliseconds (Default: 600)

Tip

There is just one direct dial digit for the entire system. Enterprise Edge cannot

verify that the number you assign as an external direct dial set is valid. Check

the number before assigning it as a direct dial set, and call the direct dial set

after you’ve assigned it in order to test it.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 445 446

Pas de commentaire

Avaya BCM 2.0 Programming Guide de l'utilisateur Page 153