Avaya BCM 4.0 Networking Guide de configuration Page 49

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 758
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 48
Chapter 2 System telephony networking overview 49
BCM 4.0 Networking Configuration Guide
PRI networking using Call-by-Call services
The example shown in Figure 5 highlights the use of PRI Call-by-Call services. It shows two
offices of a company, one in New York and one in Toronto. Each office is equipped with a BCM
system and a PRI line. Each office has to handle incoming and outgoing calls to the public
network. In addition, employees at each office often have to call colleagues in the other office.
Refer to “Private networking: PRI Call-by-Call services” on page 383 for more information.
Figure 5 PRI networking using Call-by-Call Services
To reduce long distance costs, and to allow for a coordinated dialing plan between the offices,
private lines are used to handle inter-office traffic.
If call-by-call services were not used, each BCM system might have to be equipped with the
following trunks:
12 T1 DID lines needed to handle peak incoming call traffic.
eight T1 E&M lines needed to handle inter-office calls.
eight lines needed to handle outgoing public calls
PRI SL-1/Q.Sig/DPNSS and VoIP trunk networking
PRI SL-1 trunks and VoIP trunks can be used to create private networks between BCM systems or
between BCM systems and larger call servers such as Meridian 1, Succession 1000/M, DMS100/
250 and CSE.
ETSI-QSIG and DPNSS private networking is configured very similarly, although network
features may be supported slightly differently due to local line and network requirements.
Network # 2221
Received # 2221
Internal # 2221
DID # 763-2221
Network # 6221
Received # 6221
Internal # 6221
DID # 562-6221
Toronto office
New York office
TIE Connection
Public Network
PRI
PRI
BCM
Central
Office
Central
Office
BCM
Vue de la page 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 757 758

Commentaires sur ces manuels

Pas de commentaire