Avaya BCM 4.0 Networking Guide de configuration télécharger pdf (Page 138)

100

101

138 Chapter 8 Configuring telephony resources

N0060606N0060606

IP Trunk Settings

Figure 39 IP Trunk Settings fields

VoIP Protocol H323

SIP

Select the routing protocol for your network.

QoS Monitor <check box> If you intend to use a fallback PSTN line for this gateway,

ensure that this check box is selected.

Ensure that QoS Monitor is also enabled on the remote

system.

Otherwise, leave the check box empty.

Tx Threshold <0-5> Indicate the level of transmission at which the signal must

be maintained. If the signal falls below this level the call falls

back to PSTN.

Default: 0

Actions

Add 1. On the Remote Gateways panel, click Add.

On the Add dialog:

2. Name: Enter a short descriptive title for the remote system.

3. Destination IP: Enter the public IP address of the remote system.

4. Click OK.

5. On the Remote Gateways panel, click in the fields to set any other parameters that

you require.

Delete 1. On the Remote Gateways panel, select the gateway you want to delete.

2. Click Delete.

3. Click OK on the confirmation dialog box.

Table 33 IP Trunk Settings

Attribute Value Description

Telephony Settings

Forward redirected OLI <check box> If the check box is selected, the OLI of an internal

telephone is forwarded over the VoIP trunk when

a call is transferred to an external number over the

private VoIP network.

If the check box is cleared, only the CLID of the

transferred call is forwarded.

Table 32 Routing Table fields (Sheet 2 of 2)

Attribute Value Description

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 757 758

Commentaires sur ces manuels

Pas de commentaire

Avaya BCM 4.0 Networking Guide de configuration Page 138

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Avaya BCM 4.0 Networking