Avaya BCM 4.0 Networking Guide de configuration télécharger pdf (Page 338)

100

101

338 Chapter 33 Private networking: MCDN over PRI and VoIP

N0060606N0060606

Programming notes

Camp-on

A call received by the Meridian attendant can be assigned to a telephone anywhere in the MCDN

network, when the following situations are valid:

• the target telephone rings busy when the attendant calls

• no free keys on target telephone

• DND regular feature is inactive

• DND on busy feature is inactive

The target user sees that there is a call camped on the telephone. The called user can then clear a

busy lines and take the call, or the user can choose to reject the call, using F814, or the user can

indicate Do Not Disturb, using F85.

Figure 115 demonstrates the call path for a Meridian attendant to camp a call on a telephone in the

system.

BCM programming M1 programming

To select Remote Capability for MWI on a per-loop basis for PRI:

Resources, Media Bay Modules, Bus XX, Modules on bus,

Module X:

Remote Capability MWI = select (if M1 has MWI package, with

RCAP set to MWI)

1. Disable the PBX D-channel

associated with IPT (LD96).

2. Add MWI to the RCAP of the

D-channel (LD 17 RCAP MWI)

3. Ensure the RLS ID is a minimum

of 25 (RLS ID 25).

4. Re-enabled the PBX D-channel.

Note: Package 219 is required on

the Meridian PBX to allow RCAP

MWI.

Note: If IP routing is being used, you

must complete this procedure on all

the D-channels in the private

network.

Turning on the service for IP trunks:

Services, General Settings, IP Trunking:

Remote Capability MWI = select (if M1 has MWI package, with

RCAP set to MWI)

Telco features, VMsg Ctr Tel Numbers:

• Voice Message Center 1 set to destination code plus M1 voice

mail DN

Lines (target line), Telco features:

• choose Voice message Center 1

System DNs, Active set DNs, Line access, Line assignment:

• assign target line to each set

• in target line, select VMsg

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 757 758

Commentaires sur ces manuels

Pas de commentaire

Avaya BCM 4.0 Networking Guide de configuration Page 338

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Avaya BCM 4.0 Networking