Avaya Business Communications Manager 5.0 - Fault and Performance Management Manuel d'utilisateur télécharger pdf (Page 15)

Fault and performance management fundamentals 15

Nortel Business Communications Manager 5.0

Fault and Performance Management

NN40170-701 01.01 Standard

August 2009

Alarm set

You can view critical and major alarms on a telephone set on the BCM system.

This allows a system administrator to monitor alarm activity without having a

Business Element Manager and a personal computer.

You can specify the telephone to serve as the alarm set in the Business

Element Manager. The telephone set used for alarms must have a 2-line

display and three soft keys.

The alarm set displays an alarm as follows:

XXXXX-YYYY

Where XXXXX is the alarm ID and YYYY is additional alarm information.

The following options are available when an alarm is sent to the alarm set:

• Time — indicates the date and time when the alarm occurred

• Clear — use this soft key to remove the alarm from the alarm set

Attention: Clearing an alarm from the alarm set does not change the status

of alarms on the Business Element Manager or reset the LEDs on the front

panel of the unit.

Attention: When an alarm is displayed on the alarm set, it remains visible

until you clear the alarm by using a softkey on the alarm set. More recent

alarms are not be displayed until the current alarm is cleared on the alarm

set.

The following figure shows an example of an alarm on the alarm set.

Figure 1 Alarm set alarm

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 69 70

Pas de commentaire

Avaya Business Communications Manager 5.0 - Fault and Performance Management Manuel d'utilisateur Page 15