Avaya Business Ethernet Switch 50 Series Guide de configuration télécharger pdf (Page 64)

64 Maintenance

Use your Web browser bookmark feature to save a shortcut to each

device.

Use the BSR222 Web UI to note all the IP addresses that have been

provided to your SMB network as follows:

a. From the Web UI navigation panel located in the left-hand pane,

click Maintenance.

b. Click the DHCP Table tab.

A listing of all IP addresses that the DHCP server allocated

appears.

You can access all SMB devices through a Web browser using

the IP addresses obtained from the previous step. You can use

your Web browser bookmark feature to save a shortcut to each

device.

—End—

Deploying SMB networks without using DHCP

The SMB data solution uses a DHCP server running on the BSR222

to serve IP addresses to BAP120 and BES50/100/200/1000 devices

using the DHCP client. This technique provides a near-zero conﬁguration

deployment. However, you can use the following steps to deploy SMB data

devices without DHCP.

Procedure steps

Step Action

On the BSR222 Web UI main menu, click LAN.

Click the IP tab.

From the DHCP list, select None.

Click Apply to save the changes.

This action disables the dynamic host conﬁguration protocol (DHCP)

server function on the BSR222.

Reboot the BES100/200/1000 (BES).

The BES tries unsuccessfully to obtain an IP address from the

DHCP server on the BSR222. After 60 seconds, it defaults to an IP

address of 192.168.1.132 (192.168.1.128 for BES50).

Reboot the BAP120.

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70 71 72

Pas de commentaire

Avaya Business Ethernet Switch 50 Series Guide de configuration Page 64