Avaya Business Ethernet Switch 50 Series Guide de configuration télécharger pdf (Page 33)

Autodiscovering and conﬁguring SMB devices to support the converged small site (mixed vendor

environment) (topology 1) 33

Installing the BCM50

Step Action

Install and power up the BCM50. For details, see the BCM50 First

Time Installation and Conﬁguration Guide.

Obtain and apply the necessary keycodes to enable the required

BCM features. For details see the BCM50 Keycode Installation

Guide.

3 Connect the BCM50 (LAN port) to a VLAN 1 port on the BES. For

this example, use port 4.

In the Element Manager, Element Navigation Panel, click Network >

Find Network Element > Business Ethernet Switch.

The Network Device Search dialog box appears.

Select the default IP address range.

Because the DHCP client on the BCM50 is active, the BCM50 gets

the next available IP address from the third-party router. For this

example, the IP address is 192.168.1.19.

Click OK.

The device is added to the Element Navigation Panel.

—End—

Conﬁguring the BCM50

Step Action

In the Element Manager, Element Navigation Panel, select the

BCM50 and either click Connect on the toolbar, or right-click the

BCM50 and then click Connect.

In the Task Navigation Panel, click the Conﬁguration tab.

Click Data Services > DHCP Server to access the DHCP Server

window.

ATTENTION

For the Voice VLAN, two DHCP servers exist—one on the third-party

router and one on the BCM50. You must conﬁgure the IP address pools

for each of these DHCP servers so that IP addresses for the third-party

router are not duplicated in the BCM50 IP address range and vice versa.

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Pas de commentaire

Avaya Business Ethernet Switch 50 Series Guide de configuration Page 33