Avaya Business Ethernet Switch 50 Series Guide de configuration télécharger pdf (Page 50)

50 WAN interconnected LAN reference topologies

Conﬁguring tunnels

After the sites are conﬁgured, conﬁgure the branch and client tunnels as

required by the site. See the ﬁgures "Branch tunnel conﬁguration diagram"

(page 50) and "Client tunnel conﬁguration diagram" (page 51).

Branch tunnel conﬁguration diagram

Conﬁguring a branch tunnel

Step Action

Start the Element Manager, and access the BSR222 Web page.

In the Element Manager, Element Navigation Panel, click VPN to

access the VPN page and click the Summary tab.

From the Contivity VPN Client list, select an open item.

Click Edit to access the VPN—Branch Ofﬁce page.

On the VPN—Branch Ofﬁce page

a. Select Branch Ofﬁce as the connection type.

b. Select the Active check box and the Nailed Up check box.

c. Type a name for the tunnel.

d. Type the key that was previously shared and retype to conﬁrm.

ATTENTION

This key must be identical at both ends of the tunnel.

e. Type the secure gateway address for the far end of the tunnel.

Click Add to save the settings and access the VPN—Branch

Ofﬁce—IP Policy page.

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 71 72

Pas de commentaire

Avaya Business Ethernet Switch 50 Series Guide de configuration Page 50