Avaya Business Ethernet Switch 50 Series Guide de configuration télécharger pdf (Page 31)

Autodiscovering and conﬁguring SMB devices to support the converged small site (mixed vendor

environment) (topology 1) 31

—End—

Installing and discovering the BAP120

Step Action

Install and power up the BAP120. For details, see the Business

Access Point 120 Quick Install Guide.

Connect the BAP120 to one of the VLAN 1 ports on the BES100/200.

For this example, use port 3.

In the Element Manager, Element Navigation Panel, click Network >

Find Network Element > Business Ethernet Switch.

The Network Device Search dialog box appears.

Select the default IP address range.

Click OK.

The device is added to the Element Navigation Panel.

—End—

Conﬁguring the BAP120

Step Action

1 In the Element Manager, Element Navigation Panel, select the

BAP120, and either click Web Page on the toolbar, or right-click the

BAP120 and then click Web Page.

To set the default VLAN ID on BAP120—802.11a radio

a. Click Conﬁguration > SLOT 0 – Radio A > Radio Settings to

access the Default VLAN ID (1~4094) table.

b. Enter the following individual settings for the VLAN IDs:

i. VAP0—1

ii. VAP1—2

iii. VAP3—1

iv. VAP4—1

c. Click Submit.

To enable Guest Access SSID on BAP120 – 802.11a radio

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Pas de commentaire

Avaya Business Ethernet Switch 50 Series Guide de configuration Page 31