Avaya Business Ethernet Switch 50 Series Guide de configuration télécharger pdf (Page 29)

Autodiscovering and conﬁguring SMB devices to support the converged small site (mixed vendor

environment) (topology 1) 29

c. Routing subnet1 (192.168.1.x/255.255.255.0, gateway

192.168.1.1) maps to VLAN 1

d. Routing subnet2 (192.168.2.x/255.255.255.0, gateway

192.168.2.1) maps to VLAN 2

Conﬁgure the Guest Access application (access control list [ACL])

as follows:

a. Conﬁgure the third-party router to isolate the VLAN 2-tagged

trafﬁc (for example, the 192.168.2.x pool of addresses) from

the SMB private network (for example, the 192.168.1.x pool of

addresses).

b. Use the ACL feature to deny the 192.168.2.x subnet to access

and route to the 192.168.1.x pool of IP addresses, and to enable

the 192.168.2.x to route through the ﬁrewall/NAT to access the

Internet.

—End—

Installing the Element Manager

Step Action

Install the Element Manager software on a local PC.

Launch the Element Manager application.

—End—

Installing and discovering the BES100/200

Step Action

Install and power up the BES100/200. For details, see the Business

Ethernet Switch 100/200 Series Quick Install Guide.

Connect the management PC to one of the BES100/200 RJ-45 ports.

In the Element Manager, Element Navigation Panel, click Network >

Find Network Element > Business Ethernet Switch.

The Network Device Search dialog box appears.

Select the default IP address range.

Click OK.

The device is added to the Element Navigation Panel.

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Pas de commentaire

Avaya Business Ethernet Switch 50 Series Guide de configuration Page 29