Avaya Business Ethernet Switch 50 Series Guide de configuration Page 28

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 72
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 27
28 Converged small site (mixed-vendor environment): reference topology 1
In this example, two port-based VLANs are established on the BES100/200.
VLAN 1 is the default VLAN with a port membership of 1 through 10 and 12
through 50, leaving port 11 out of the VLAN. VLAN 2 is also a port-based
VLAN with port membership of 1, 2, and 11. VLAN 2 allows ports 1 and 2 to
be members of the guest and default management VLANs, but keeps port
11 separated as a wired port dedicated to the guest VLAN only.
This reference topology descr ibes a simple example; however, port selection
for VLANs must reflect the specific needs of the installation.
Installing and configuring the third-party router
Step Action
1
Install the third-party router, referring to the manufacturer’s
documentation and procedures.
2
Set the following parameters on the third-party router:
a. support of network address translation (NAT)
b. support of the static routing function
c. support of four at a minimum, but preferably eight LAN-based
routings for each physical port
d. support of VPN gateway static and dynamic tunnels (IPSec data
encryption standard (DES) and 3DES encryption)
e. support of multiscope DHCP server function: four subnets at a
minimum, but preferably eight
f. support of Stateful firewall functions
3 Configure the NAT IP address translation by using the many-to-one
port-based method.
ATTENTION
For the Voice VLAN, two DHCP servers exist: one on the third-party
router and one on the BCM50. You must configure the IP address pools
for each of these DHCP servers so that IP addresses for the third-party
router are not duplicated in the BCM50 IP address range and vice versa.
4
Configure the third-party router DHCP server with mapping of subnet
to VLAN-tagged traffic as follows:
a. DHCP server pool-1 = 192.168.1.2 to 192.168.1.127, mask
255.255.255.0, default gateway 192.168.1.1
b. DHCP server pool-2 = 192.168.2.2 to 192.168.2.127, mask
255.255.255.0, default gateway 192.168.2.1
SMB
Small and Medium Business Solutions Overview and Configuration Guide
NN47910-200 02.01 Standard
Release 1.00 11/22/2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.
Vue de la page 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 71 72

Commentaires sur ces manuels

Pas de commentaire