Avaya Business Ethernet Switch 50 Series Guide de configuration télécharger pdf (Page 34)

34 Converged small site (mixed-vendor environment): reference topology 1

From the DHCP server is list, select Enabled—IP Phones Only.

In the Task Navigation Panel, click the Conﬁguration tab, and

click Resources > Telephony Resources to access the Telephony

Resources window.

Click the IP Terminal Global Settings tab.

Select the check boxes for Enable registration, Enable global

registration password, and Auto-assign DN.

ATTENTION

Because Enable global registration password is selected, a password is

requested when the IP phones register with the BCM50. The default

password is BCMI.

Leave the remaining default values.

—End—

Connecting the IP phones

Nortel IP phones are fully DHCP-enabled, and require no setup. Each IP

Phone receives a DHCP address from the BCM50. After the IP Phones are

connected to the BCM50, the details appear in the IP Terminal Details tab in

the Telephony Resources window.

Procedure steps

Step Action

Connect the Ethernet port of the IP Phone to a VLAN 1 port on the

BES. For this example, two IP 2004 phones are connected to the

PoE ports.

In the Element Manager, Element Navigation Panel, click

Conﬁguration > Telephony Resources > IP Terminal Details to

view the settings.

—End—

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 71 72

Pas de commentaire

Avaya Business Ethernet Switch 50 Series Guide de configuration Page 34