Avaya Business Ethernet Switch 50 Series Guide de configuration télécharger pdf (Page 59)

Interconnection of main and remote sites using BSR222 (topology 2 with topology 3) 59

In the remote site, using a CLI command, set the S1 and S2

addresses to the IP address of the BCM50, identiﬁed in the router

DHCP table or in the BCM50.

Connect to the router through Telnet or SSH. (Telnet or SSH must

be enabled on that router.) Select menu 24, select menu 8, and

enter the following commands:

ip dhcp enif0 server voipserver 1 <BCM50_IP_Ad-

dress > 7000 1

ip dhcp enif0 server voipserver 2 <BCM50_IP_Ad-

dress> 7000 1

Add the IP phones to the main site as described in the BCM50 First

Time Installation and Conﬁguration Guide.

Create a client tunnel to the remote site. See "Conﬁguring a client

tunnel" (page 52).

—End—

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 71 72

Pas de commentaire

Avaya Business Ethernet Switch 50 Series Guide de configuration Page 59