Avaya Configuring Traffic Filters and Protocol Prioritization Manuel d'utilisateur télécharger pdf (Page 92)

Configuring Traffic Filters and Protocol Prioritization

6-4

308645-15.0 Rev 00

Creating a Template

To create an inbound traffic filter template:

Site Manager Procedure

You do this System responds

1. Display the Filters window (Figure 6-1). See

“Displaying the Inbound Traffic Filters Window.”

2. Click on

Template

. The Filter Template Management window opens

(Figure 6-2).

3. Click on

Create

. The Create Template window for the protocol opens

(Figure 6-3).

4. Specify a name for the new template in the Filter

Name field.

Use a descriptive name. For example, the name

Drop_Telnet

suggests the criterion and action to

drop Telnet session requests from remote nodes.

5. Choose Criteria > Add >

criterion

See Chapter 3 for information about the criteria

for your protocol. Each filter template can use

only one criterion.

The Add Range window opens.

6. Specify a range for the selected criterion. To

specify a hexadecimal number, use the prefix 0x.

You must specify at least one range. If the range

consists of just one value, specify that value in

the Minimum value field. See Chapter 5 for

information about common traffic filter ranges.

7. Click on

. The Add Range window closes. The criterion and

range appear in the Filter Information field of the

Create Template window.

8. To add more ranges, choose Range > Add. Then,

repeat steps 6 and 7.

You can add up to 100 ranges for each criterion.

9. Choose Action > Add >

action

10. Click on

. The Filter Template Management window opens

(Figure 6-2). The template appears in the templates

list.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 201 202

Commentaires sur ces manuels

Pas de commentaire

Avaya Configuring Traffic Filters and Protocol Prioritization Manuel d'utilisateur Page 92

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Avaya Configuring Traffic Filters and Protocol Prioritization