Avaya Configuring Traffic Filters and Protocol Prioritization Manuel d'utilisateur télécharger pdf (Page 178)

Configuring Traffic Filters and Protocol Prioritization

A-8

308645-15.0 Rev 00

Prioritization Length Parameters

Use the following descriptions as guidelines when you edit parameters in the

Prioritization Length window.

Parameter: Packet Length

Path: Configuration Manager >

interface connector

> Edit Circuit > Protocols >

Edit Protocol Priority > Priority/Outbound Filters > Create > Create Priority/

Outbound Template > Actions > Length > Prioritization Length

Default: None

Options: 0 to 4608 bytes

Function: Defines a packet-length measurement by which each packet that passes the filter

criterion is compared. The action that is applied to each packet depends on

whether it is less than, equal to, or greater than the value you specify. This

action also depends on the values of the Less Than or Equal Queue parameter

and the Greater Than Queue parameter.

Instructions: Specify a packet-length value, in bytes.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.4.1.7

Parameter: Less Than or Equal Queue

Path: Configuration Manager >

interface connector

> Edit Circuit > Protocols >

Edit Protocol Priority > Priority/Outbound Filters > Create > Create Priority/

Outbound Template > Actions > Length > Prioritization Length

Default: NORMAL

Options: HIGH

LOW

NORMAL

Function: Specifies the queue in which a packet is placed if its length is less than or equal

to the value of the Packet Length parameter. For example, if Packet Length is set

to 1024 bytes, any packet that is 1024 bytes or less is placed in the queue you

specify.

Instructions: Accept the default, NORMAL, or select LOW or HIGH.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.4.1.8

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 201 202

Pas de commentaire

Avaya Configuring Traffic Filters and Protocol Prioritization Manuel d'utilisateur Page 178