Avaya Configuring Traffic Filters and Protocol Prioritization Manuel d'utilisateur Page 179

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 202
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 178
Site Manager Protocol Prioritization Parameters
308645-15.0 Rev 00
A-9
ATM Service Level Priority Queuing Parameter
The following Site Manager parameter lets you specify the way protocol priority
queuing is applied to ATM services. Use the following description as a guideline
when you configure protocol priority queuing for ATM services.
Parameter: Greater Than Queue
Path: Configuration Manager >
interface connector
> Edit Circuit > Protocols >
Edit Protocol Priority > Priority/Outbound Filters > Create > Create Priority/
Outbound Template > Actions > Length > Prioritization Length
Default: LOW
Options: HIGH
|
LOW
|
NORMAL
Function: Specifies the queue in which a packet is placed if its length is greater than the
value of the Packet Length parameter. For example, if Packet Length is set to
1024 bytes, any packet that is 1025 bytes or larger is placed in the queue you
specify for this parameter.
Instructions: Accept the default, LOW, or select NORMAL or HIGH.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.4.1.9
Parameter: Service Level Filter
Path: Configuration Manager > ATM1 connector > ATM > PVC Protocol Priority >
Priority Interface > Service Level
Default: Disable
Options: Enable
|
Disable
Function: Determines whether interface/driver level priority queuing or service/virtual
circuit (VC) level priority queuing will be applied to packets when both types of
priority queuing are configured.
Instructions: Set to Enable if you want to override the interface/driver level priority queuing
and apply only the service/VC priority queuing to the packets. Set to Disable if
you want priority queuing applied at both the service record level and the
interface level.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.1.1.20
Vue de la page 178
1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 201 202

Commentaires sur ces manuels

Pas de commentaire