Avaya Using Technician Interface Scripts Manuel d'utilisateur télécharger pdf (Page 711)

100

101

303560-A Rev 00

2-663

alerts

Displays all SYNC circuits that are enabled but not up. Use this display to identify the

interfaces that are not working. The table includes the following information:

Slot Slot identifier; ranges from 1 to 14.

Conn Connector identifier; ranges from 1 to 4.

Circuit Name of the circuit associated with this line.

State State of the line driver, as follows:

•

Disabled

- User has manually disabled the driver.

•

Down

- Driver is not operational.

•

DSR Wait

- External equipment, such as a modem, DSU, or CSU,

is not currently up and thus is not asserting a Data Set Ready

signal.

•

Init

- Driver is initializing.

•

LMI Wait

- Driver is waiting for any of four WAN protocols to

indicate that a link layer connection has been established to

another entity. This state applies to the frame relay, SMDS, ATM,

and PPP protocols.

•

Not Pres

- Driver is enabled but not yet started. This state occurs

for several reasons. For example, the Link Module may not be

physically present in the chassis. The software may be booting

and has not yet initialized the driver software. The slot may be

running diagnostics. Or there may be a problem with the

configuration.

MAC Address Physical address of the line. The line driver fills this address in

from the 48-bit address stored in the serial number PROM for this

connector.

Line Number Line number for this line.

MTU Maximum transfer unit size -- the buffer size for the SYNC port

(also the largest frame that can be transmitted or received across the

SYNC port). The value ranges from 3 to 4608 bytes.

1 2 ... 706 707 708 709 710 711 712 713 714 715 716 ... 891 892

Commentaires sur ces manuels

Pas de commentaire

Avaya Using Technician Interface Scripts Manuel d'utilisateur Page 711

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Avaya Using Technician Interface Scripts