Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manuel d'utilisateur télécharger pdf (Page 98)

Configuring IP, ARP, RARP, RIP, and OSPF Services

3-38

308627-14.20 Rev 00

For example, the following command directs the router to use its own IP address

and the circuit’s MAC address on IP interface 2.2.2.2:

ip/2.2.2.2/255.255.0.0#

configured-mac-address 0

ip/2.2.2.2/255.255.0.0#

Using Site Manager

To configure this parameter for a multinet or multigroup configuration, see

Configuring SMDS.

Enabling Source Routing over a Token Ring Network

The IP router can route over token ring networks that contain one or more source

routing bridges.

In a source routing network, every end station that sends a frame supplies the

frame with the necessary route descriptors so that it can be source routed across

the network. Thus, in order for an IP router to route packets across a source

routing network, the router must act as an end station, supplying route descriptors

for each packet before it sends it onto the network.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose Protocols.

The Protocols menu opens.

2. Choose IP. The IP menu opens.

3. Choose Interfaces. The IP Interface List window opens.

4. Click on the interface that you want to edit. Site Manager displays the parameter

values for that interface in the IP Interface

List window.

5. Set the MAC Address parameter. Click on

Help or see the parameter description on

page A-10.

6. Click on Apply, and then click on Done. You return to the Configuration Manager

window.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 389 390

Pas de commentaire

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manuel d'utilisateur Page 98