Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur Page 69

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 90
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 68
Configuring Router Redundancy
308626-14.00 Rev 00
5-27
Configuring Router Redundancy on One 5380 Router
If you are working with a Model 5380 as a single-slot router, you can configure
different slots on the same router module as members of a router redundancy
group. However, the slot number is incorporated in the configuration, so it is
impossible to make identical configuration files for any two slots on the module.
Therefore, you must create two group configuration files, exactly the same except
for the member ID. The following steps describe this procedure:
1.
Create the group mode configuration file for the first slot and save it as
Discovery1.cfg
.
2.
Create a second group mode configuration file for the second slot,
identical to the first file, including the same group ID, and save it as
Discovery2.cfg
. If you edited any parameters in
Discovery1.cfg
, make the
same choices for
Discovery2.cfg
.
3.
Open each of these files in Member Mode, and assign each a unique
member ID. Save each file.
4.
Copy the files to the router’s Flash card.
Configuring Router Redundancy on Different 5380 Routers
You can configure router redundancy so that a slot on one Model 5380 backs up
either the same slot or a different slot on another 5380:
To back up the same slot on another 5380, configure router redundancy in the
usual way, following the directions at the beginning of this chapter.
To back up a different slot on another 5380, you must create and use two
group configuration files, following the directions in the previous section,
“Configuring Router Redundancy on One 5380 Router.”
Removing Router Redundancy
To remove router redundancy from a circuit or from an entire router:
1.
Create a new configuration file or modify the existing configuration file in
local or remote mode.
2.
Reboot the router.
Vue de la page 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 89 90

Commentaires sur ces manuels

Pas de commentaire