Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur télécharger pdf (Page 66)

Configuring Interface and Router Redundancy

5-24

308626-14.00 Rev 00

Parameter: Priority

Default: 1

Options: 1 to 128

Function: Indicates this router’s priority to become primary router; the higher the

value, the higher the priority. The router with the highest priority becomes

the primary router. If two routers have the same priority, the router with

the lower member ID number has higher priority to become the primary

router.

Instructions: Enter a number from 1 to 128.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.1.14

Parameter: Warm Boot

Default: Disable

Options: Enable | Disable

Function: Allows router redundancy to operate among routers running BayRS

Version 11.01 or later, and 11.00 or earlier.

Instructions: If all of the routers in a router redundancy group are running Version

11.01 or later, use the default setting, Disable, to allow a router in the

group to perform a role switch without rebooting. This is also called a hot

standby.

If the routers in a router redundancy group are running Version 11.01 or

later, and Version 11.00 or earlier, a router in the group must reboot, also

called warm boot, to perform a role switch. In this situation, set Warm

Boot to Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.1.31

Caution: Use the same Warm Boot setting for all routers in a router

redundancy group.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 89 90

Pas de commentaire

Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur Page 66