Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur télécharger pdf (Page 41)

Configuring Interface Redundancy

308626-14.00 Rev 00

4-7

To add an interface, select an available line of the same LAN type as the

other members of the group. To delete an interface, select the line you

want to delete from the group.

Choose Lines > Change Lines.

The interface you selected is now added to or deleted from the interface

redundancy group. If only one interface remains on the circuit, the interface

redundancy group no longer exists.

Removing Interface Redundancy from a Circuit

To remove interface redundancy from a circuit:

In the Configuration Manager window, select any member of the

interface redundancy group you want to remove.

The Edit Connector window opens (see Figure 4-2

on page 4-3).

Select Edit Circuit.

The Circuit Definition window opens (see Figure 4-3

on page 4-4).

Deselect all but one member of the interface redundancy group.

Choose Lines > Change Lines.

The interface redundancy group no longer exists.

Choose File > Exit to exit the window.

Note:

You can find out whether interface redundancy is configured on a circuit

by selecting that circuit in the Circuit Definition window and checking the

Lines menu. If Interface Redundancy appears dim, it is not configured on the

circuit you selected.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 89 90

Pas de commentaire

Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur Page 41