Avaya Troubleshooting Routers Guide de dépannage télécharger pdf (Page 241)

Using the Technician Interface to Configure and Run Packet Capture

308656-14.00 Rev 00

B-47

Parameter: Type

Packet Capture supports four Type parameters.

Default: 3

Options: 1

Function: Sets Packet Capture filtering for each filter type.

Instructions: Set to 1 (capture) if you want Packet Capture to copy only the packets

containing the data that matches the string.

Set to 2 (trigger) if you want Packet Capture to terminate when it matches

data in a packet to the string. Packet Capture does not copy the packet

containing the match.

Set to 3 if you want Packet Capture to copy every packet on a circuit,

regardless of its contents.

Packet

Direction MIB Attribute Name

Filter

No. MIB Object ID

Attribute

No.

Incoming wfPktCaptureRxFltr1Type 1 1.3.6.1.4.1.18.3.4.21.1.1.14 14

Incoming wfPktCaptureRxFltr2Type 2 1.3.6.1.4.1.18.3.4.21.1.1.24 24

Outgoing wfPktCaptureTxFltr1Type 1 1.3.6.1.4.1.18.3.4.21.1.1.19 19

Outgoing wfPktCaptureTxFltr2Type 2 1.3.6.1.4.1.18.3.4.21.1.1.30 30

Note:

You can configure a filter as a capture type or a trigger type, but not

both. If you want to configure two receive filters, one a capture filter and the

other a trigger filter, configure the trigger filter after the capture filter.

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 267 268

Pas de commentaire

Avaya Troubleshooting Routers Guide de dépannage Page 241