Avaya BCM First Time Guide d'installation télécharger pdf (Page 13)

Installation overview / 13

P1012750 Issue 01

Changing the IP address using an Ethernet crossover cable

You can use an Ethernet crossover cable to connect your computer to the LAN card in the BCM. With

this connection, you can use Unified Manager to configure the Business Communications Manager

system.

To connect using an Ethernet crossover cable, you need a computer equipped with a 10/100 BaseT

network interface card and TCP/IP protocol. You also need an Ethernet crossover cable.

You must configure your computer, before you use it to connect to the BCM. To configure your

computer:

1. Click the Start button, point to Settings and then click Control Panel.

2. Double click the Network icon.

3. Select your TCP/IP adapter and then click the Properties button.

4. Click the IP Address tab.

5. Click the Specify an IP address option.

6. Click the IP Address box and enter 10.10.10.2.

7. Click the Subnet mask box and enter 255.255.255.0.

8. Click the OK button.

9. Click the OK button.

10. Click the Yes button to restart the computer.

Note: You do not need to restart the computer if the computer is using the

Windows 2000 or Windows XP operating system.

After you have configured the computer, you need to connect it to the BCM.

1. Shutdown the computer.

2. Attach one end of the Ethernet crossover cable to the LAN card on the BCM.

3. Connect the other end of the cable to the network interface card on your computer.

4. Start up the computer.

After you connect the computer to the BCM, you can use the Quick Install wizard to set the initial

configuration parameters. For information about the Quick Install wizard, refer to Using the Quick

Start wizard on page 7.

Note: If you are installing the BCM as a Survivable Remote Gateway (SRG) for Succession

Branch Office, you must enter the SRG keycode before running the Quick Start Wizard.

For information about how to enter the SRG keycode and run the Quick Start Wizard on

a SRG, refer to the BCM200/400 SRG Configuration Guide.

1 2 ... 8 9 10 11 12 13 14

Pas de commentaire

Avaya BCM First Time Guide d'installation Page 13