Avaya BCM First Time Guide d'installation télécharger pdf (Page 10)

10 / Installation overview

P1012750 Issue 01

16. Position the bezel below and between the Base Function Tray latches. Lift the bezel until the

bezel clips line-up with the corresponding Base Function Tray bezel holes. Insert the bezel clips

into the Base Function Tray bezel holes.

17. Push on the face of the bezel so that it rests flush with the face of the Base Function Tray.

18. Install the bezel screws.

19. Position the Base Function Tray in the correct bay in the BCM200 or BCM400.

20. Partially insert the Base Function Tray into the platform base chassis.

21. Connect the DS30 connectors to the MSC card.

22. Push the Base Function Tray completely into the chassis. Be careful not to crimp the DS30

cables.

23. Move the Base Function Tray latches to the lock position.

24. Install the Base Function Tray latch screws.

Initializing the WAN card

After you have installed the WAN card, you must initialize it using a terminal connected to the

BCM200 or BCM400. For information about the terminal required, refer to Changing the IP address

using a null modem cable on page 11.

To initialize the WAN card:

1. Make sure the Status LED is on. This LED indicates that the BCM200 or BCM400 is operating

correctly.

2. Attach the null modem cable to the serial port on the BCM200 or BCM400.

3. Attach the other end of the null modem cable to the serial port on the terminal or computer.

4. Make sure the Business Communications Manager system and your terminal or computer are on.

5. If you are using a computer, start your terminal emulation program.

6. Press the Enter key.

7. For User ID, type ee_admin and press the Enter key.

8. For Domain, press the Enter key.

9. For Password, type PlsChgMe! and press the Enter key.

10. Press the 1 key to access the Platform Initialization Menu page.

11. Press the 1 key to access the Initialize Menu page.

12. Press the 1 key to select the Initialize Universal Profile option.

The Business Communications Manager system reboots to enable the WAN card.

1 2 ... 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Avaya BCM First Time Guide d'installation Page 10