Avaya Using Technician Interface Software Manuel d'utilisateur télécharger pdf (Page 254)

Using Technician Interface Software

A-10

308657-14.00 Rev 00

Unsupported Operations

The SNMP set operation is not supported for MIB-II objects. All set operations

must be performed through the Nortel Networks private MIB (1.3.6.1.4.1.18.3).

Line Number Attributes

Line number attributes exist in all line records (for example: SYNC,HSSI,

CSMACD, and TOKEN) in the Nortel Networks router MIB for Version 9.00

router software. These attributes have the name wfXyzLineNumber, where Xyz is

the prefix for the appropriate line record. Site Manager generates a line number

attribute to uniquely identify each port in the router configuration. The router uses

line numbers to accommodate more than one line per port, and to reference WAN

protocols configured on those lines.

authenticationFailure Issued when an SNMP access occurs. An invalid

access occurs if a bad community or illegal manager

address is used. Authentication traps will be masked if

they are not enabled.

egpNeighborLoss Issued when an acquired EGP neighbor is lost.

enterpriseSpecific All Nortel Networks router system log events can be

sent as traps. They must be configured through the

wfSnmpTrapEntityTable

and the

wfSnmpTrapEventTable

. The specific trap value is a

4-byte value. The first (most significant) byte

indicates the slot generating the event; the second byte

indicates the severity [debug (1), informational (2),

warning (4), fault (8), and trace (16)]; the third byte

indicates an entity code (for example, ip (2), snmp (3),

csmacd (9); and the fourth byte indicates the event

number or the particular event type unique to each

entity. The specific traps contain one variable binding

-- a display string with the name

1.3.6.1.4.1.18.3.5.3.5.4.1.0. The string contains the

actual log message that was recorded in the system

event log.

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 343 344

Pas de commentaire

Avaya Using Technician Interface Software Manuel d'utilisateur Page 254