Avaya Using Technician Interface Software Manuel d'utilisateur télécharger pdf (Page 219)

System Administration

308657-14.00 Rev 00

7-83

Example (ip6 stats <ifindex>)

Enter the following command to display data for interface 1 on the device:

ip6 stats 1

Interface 1 (PPP to Quincy_Adams) is Up:

Link: PPP at 64102 bps (circuit 3)

Neighbor Discovery: Off, Router Advertisements: Off

Address(es): FE80::0001:A2B0:1FBE (link-local)

Rx 434756, Tx 441626, Drop 0, Err 0

Icmp In: DestUnr 0, TimeExc 0, ParmProb 0, TooBig 0

Icmp Out: DestUnr 0, TimeExc 0, ParmProb 0, TooBig 0

Icmp In: Echos 0, EchoRep 0, RS 0, RA 0, NS 0, NA 0

Icmp Out: Echos 0, EchoRep 0, RS 0, RA 0, NS 0, NA 0

Setting Modem Initialization Strings

Several AT modem commands contain a dollar sign ($) or backslash (\). The

Technician Interface uses the $ to reference a variable and the \ to prevent the

substitution of a variable. If one of these symbols appears in the

wfModemEntry.wfModemCfgInitString initialization command, the Technician

Interface does not set the string. For example:

[1:1]$ get wfModemEntry.wfModemCfgInitString.1.2

wfModemEntry.wfModemCfgInitString.1.2 = "ATF"

[1:1]$ set wfModemEntry.wfModemCfgInitString.1.2

"AT$SB64000";commit

Variable: Undefined Variable - SB64000

The Technician Interface interprets the command as containing an undefined

variable and does not change the MIB value.

To set the MIB variable, you must add a backslash (\) in front of the symbol

causing the confusion (that is, the $ or \). For example:

[1:1]$ get wfModemEntry.wfModemCfgInitString.1.2

wfModemEntry.wfModemCfgInitString.1.2 = "ATF"

[1:1]$ set wfModemEntry.wfModemCfgInitString.1.2

"AT\$SB64000";commit

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 343 344

Pas de commentaire

Avaya Using Technician Interface Software Manuel d'utilisateur Page 219