Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur télécharger pdf (Page 46)

Configuring Interface and Router Redundancy

5-8

Parameter: Group ID

Default: 1

Range: 1 to 128

Function: Speciﬁes the identiﬁcation number for the redundancy group. Each group

ID number in a network must be unique.

Instructions: Enter a number from 1 to 128 that you have not already assigned to a

redundancy group on the network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.1.4

Parameter: Automatic Role Switching

Default: Auto

Options: Manual | Auto

Function: Enables automatic role switching out of the primary role. When the

primary router switches out of the primary role, a backup router switches

into the primary role. Anything else that backup router has been doing

stops when it becomes primary. In some circumstances, you may not want

that stoppage to occur automatically. If that is the case, set this parameter

to Manual. The warning section of the log will indicate when role

switching is required.

Instructions: Select Manual or accept the default of Auto.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.1.11

Parameter: Hello Timer

Default: 2 seconds

Range: 1 to 86,400 seconds

Function: Speciﬁes the amount of time that the routers in the redundancy group

have for sending each other primary and secondary Hello protocol data

units (PDUs). The routers use Hello PDUs to initiate the bidding process

that determines which router is primary.

Instructions: Enter a value in the speciﬁed range or accept the default of 2.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.1.15

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 71 72

Pas de commentaire

Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur Page 46