Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur télécharger pdf (Page 38)

Configuring Interface and Router Redundancy

4-6

To add an interface, select an available line of the same LAN type as the

other members of the group. To delete an interface, select the line you

wish to delete from the group.

4. Select Lines➔Change Lines.

The interface you selected is now added to or deleted from the interface

redundancy group. If only one interface remains on the circuit, the interface

redundancy group no longer exists.

Removing Interface Redundancy from a Circuit

To remove interface redundancy from a circuit:

1. In the Conﬁguration Manager window, select any member of the

interface redundancy group you want to remove.

The Edit Connector window appears (refer to Figure

4-2).

2. Select Edit Circuit.

The Circuit Deﬁnition window appears (refer to Figure

4-3).

3. Deselect all but one member of the interface redundancy group.

4. Select Lines➔Change Lines.

The interface redundancy group no longer exists.

5. Select File➔Exit to exit the window.

Note: You can ﬁnd out whether interface redundancy is conﬁgured on a circuit

by selecting that circuit in the Circuit Deﬁnition window and checking the

Lines menu. If Interface Redundancy is grayed out, it is not conﬁgured on the

circuit you selected.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 71 72

Pas de commentaire

Avaya Configuring Interface and Router Redundancy Manuel d'utilisateur Page 38