Avaya Configuring MPLS Services Manuel d'utilisateur télécharger pdf (Page 73)

Site Manager Parameters

305754-A Rev 00

A-3

Parameter: Local IP Address

Path: Configuration Manager > Circuits > Edit Circuits > Edit > MPLS > LDP

Default: 0.0.0.0

Options: Any valid IP address

Function:

Identifies the local IP address that LDP uses to establish the TCP connection to

the LSR.

Instructions: Enter the IP address in dotted-decimal notation.

Bay Networks recommends that

you use the IP address that you used when configuring the IP protocol on this

interface.

You can, however, accept the default value, 0.0.0.0, under specific

circumstances (for example, if you are using circuitless IP).

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.15.1.1.6

Parameter: Local TCP Port

Path: Configuration Manager > Circuits > Edit Circuits > Edit > MPLS > LDP

Default: 8192

Options: 1 to 65535

Function: S

pecifies the TCP port number that LDP on the label edge router (LER) uses to

establish the TCP connection to the label-switching router (LSR).

Instructions:

Accept the default, 8192, or enter a TCP port number from 1 to 65,535.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.15.1.1.7

Parameter: Remote IP Address

Path: Configuration Manager > Circuits > Edit Circuits > Edit > MPLS > LDP

Default: 0.0.0.0

Options: Any valid IP address

Function: S

pecifies the IP address of the interface on the label-switching router (LSR) that

LDP on the label edge router (LER) uses to establish the TCP connection

Instructions: Enter the IP address in dotted-decimal notation.

Bay Networks recommends that

you use the IP address that you used when configuring the IP protocol on the

remote interface.

You can, however, accept the default value, 0.0.0.0, under

specific circumstances (for example, if you are using circuitless IP).

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.15.1.1.8

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 91 92

Pas de commentaire

Avaya Configuring MPLS Services Manuel d'utilisateur Page 73