Avaya Configuring MPLS Services Manuel d'utilisateur télécharger pdf (Page 26)

Configuring MPLS Services

2-2

305754-A Rev 00

Creating an ATM Circuit

MPLS operates only over an ATM circuit. You must create an ATM circuit before

you can configure MPLS.

To create an ATM circuit, complete the following tasks:

Adding an LDP Session Record

After you create an ATM circuit over which MPLS can operate, you must add an

LDP session record to that circuit. For information about creating an ATM circuit,

see “Creating an ATM Circuit

” on page 2-2.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on an ATM link module interface

(

ATM1

The Add Circuit window opens.

2. Click on

to accept the default circuit

name.

The Select Connection Type window

opens.

3. Go to the following section, “Adding an

LDP Session Record,” or go to step 4 to

exit this procedure.

4. Click on

Done

. You return to the Configuration Manager

window.

Note:

This release supports only one LDP session record per ATM interface.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 91 92

Pas de commentaire

Avaya Configuring MPLS Services Manuel d'utilisateur Page 26