Avaya Configuring MPLS Services Manuel d'utilisateur télécharger pdf (Page 39)

Customizing the MPLS Configuration

305754-A Rev 00

3-3

Changing the Local IP Address

The local IP address identifies the local IP address that LDP uses to establish the

TCP connection to the LSR.

The default address, 0.0.0.0, is useful only under specific circumstances (for

example, when using circuitless IP). In most cases, you must enter a valid IP

address for this interface in dotted-decimal notation. If you started MPLS with the

default IP address of 0.0.0.0, you can change the address.

To change the local IP address, complete the following tasks:

Note:

Bay Networks recommends that you use the IP address that you used

when configuring the IP protocol on this interface.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

MPLS

. The Edit MPLS Connector window opens.

3. Click on

LDP

. The LDP Session Records List window

opens.

4. Set the

Local IP Address

parameter.

Click on

Help

or see the parameter

description on page A-3.

5. Click on

Done

. You return to the Edit MPLS Connector

window.

6. Click on

Done

. You return to the Select Connection Type

window.

7. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Commentaires sur ces manuels

Pas de commentaire

Avaya Configuring MPLS Services Manuel d'utilisateur Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Avaya Configuring MPLS Services