Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur télécharger pdf (Page 74)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

3-30

308628-15.0 Rev 00

For example, the following command sequence configures the router to log BGP

warning, fault, and trace messages for open and keepalive packets for a peer

connection, and then disables message logging:

peer/2.2.2.2/2.2.2.4#

debug-control

debug-control/2.2.2.2/2.2.2.4#

log-message-type {warning fault trace}

debug-control/2.2.2.2/2.2.2.4#

log-packet-type {open

keepalive}

debug-control/2.2.2.2/2.2.2.4#

log-packet-type disabled

debug-control/2.2.2.2/2.2.2.4#

back

peer/2.2.2.2/2.2.2.4#

Using Site Manager

To configure BGP event message logging, complete the following steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

BGP DEBUG.

The BGP DEBUG Parameters window

opens.

5. Click on

Add

. The NEW BGP DEBUG window opens.

6. Set the following parameters:

• Peer Local/Remote

• Message Level

• Message Trace Switch

Click on

Help

or see the parameter

descriptions beginning on page A-24

7. Click on

. You return to the BGP DEBUG

Parameters window.

8. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 275 276

Commentaires sur ces manuels

Pas de commentaire

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur Page 74

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)