Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur Page 64

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 276
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 63
Configuring IP Exterior Gateway Protocols (BGP and EGP)
3-20
308628-15.0 Rev 00
Using Site Manager
To enable or disable black hole punching, complete the following steps:
Disabling and Reenabling the BGP-4 MED Attribute
By default, BGP-4 considers the multiexit discriminator (MED) path attribute in
the route selection process (see Table 1-3 on page 1-10
).
You can use the BCC or Site Manager to configure BGP-4 so that it disregards the
MED attribute in the route selection process.
Using the BCC
To configure BGP-4 to disregard the MED attribute in the route selection process,
go to the BGP prompt (for example,
box; ip; /jointfilesconvert/97454/bgp
) and enter:
med-comparison
<
state>
state
is either
enabled
(default) or
disabled
.
For example, the following command causes BGP-4 to disregard the MED
attribute in an update when selecting a route:
/jointfilesconvert/97454/bgp#
med-comparison disabled
/jointfilesconvert/97454/bgp#
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
BGP Global
. The Edit BGP Global Parameters window
opens.
5. Set the
Black Hole Routes
parameter.
Click on
Help
or see the parameter
description on page A-8
.
6. Click on
OK
. You return to the Configuration Manager
window.
Vue de la page 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 275 276

Commentaires sur ces manuels

Pas de commentaire