Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur Page 180

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 276
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 179
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-6
308628-15.0 Rev 00
Parameter: Max Redundant Routes
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: 255
Options: 0 to 255
Function: Specifies the maximum number of IBGP routes to the same destination to be
stored. At least one route is stored, even if 0 is specified.
Instructions: Accept the default value, 255, or enter an integer from 1 through 255.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.14
Parameter: Detect Redundant Connections
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether redundant BGP connections to the same router will be
detected and disallowed. Collision detection (that is, detecting the existence of
redundant connections) is based on router ID. If two BGP peers have multiple
physical connections and want to establish a BGP session across each physical
connection, you must disable this parameter. The advantage of a configuration
with multiple physical connections is redundancy. The disadvantage is that such
a configuration results in multiple copies of each route.
Instructions: If you want only one BGP connection to the same router to be maintained, use
the default. If you want to allow redundant connections, enter Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.16
Vue de la page 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 275 276

Commentaires sur ces manuels

Pas de commentaire