Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur télécharger pdf (Page 219)

Site Manager Parameters

308628-15.0 Rev 00

A-45

Parameter: BGP Community attribute action

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies

Default: As Is

Options: As Is

Remove

Append

Replace

Function: Specifies the action to take regarding BGP communities specified in an update.

Instructions: Specify one of the following actions:

• As Is (the default): leave the existing BGP community attribute unchanged.

• Remove: delete all BGP communities from an update.

• Append: append to the existing BGP communities the list of communities

specified in the BGP Community to accept parameter.

• Replace: replace existing BGP communities with those specified in the BGP

Community to accept parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.25

Parameter: BGP Route Flap Dampening

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies

Default: Disable

Options: Enable

Disable

Function: Enables or disables route flap dampening. Route flap dampening applies only to

EBGP learned routes.

Instructions: Accept the default, Disable, or specify Enable to enable route flap dampening.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.26

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 275 276

Pas de commentaire

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur Page 219