Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur télécharger pdf (Page 186)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-12

308628-15.0 Rev 00

Parameter: Peer AS

Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers

Default: None

Options: 1 to 65535

Function: Identifies the autonomous system to which the BGP router at the remote end of

this BGP peer connection belongs.

Instructions: Enter the appropriate AS number.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.10

Parameter: Local Address

Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers > Add

Default: None

Options: Any IP address

Function: Specifies the IP address of the interface on the local side of this BGP peer

connection.

Instructions: Enter the appropriate address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.4

Parameter: Peer Mode

Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers

Default: None

Options: None

Reflector Internal

Reflector External

Function: Indicates the route reflector mode of the remote BGP peer.

Instructions: If the peer is a node, use the default, None.

If the peer is a route reflector in the same cluster, specify Reflector Internal.

If the peer is a route reflector in a different cluster, specify Reflector External.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.35

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 275 276

Pas de commentaire

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur Page 186