Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur télécharger pdf (Page 229)

Site Manager Parameters

308628-14.00 Rev 00

A-53

Parameter: Next Hop Mask

Path: Configuration Manager > Protocols > IP > Static Routes

Default: 0.0.0.0

Options: Any valid subnet mask address

Function: Specifies the subnet mask of the next-hop router. The parameter also defines a

black hole route for a supernet.

Instructions: Enter the subnet mask in dotted-decimal notation. To configure a black hole

static route, enter 255.255.255.255. If you are configuring a static route to an

unnumbered interface, enter 0.0.0.0.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.7

Parameter: Preference

Path: Configuration Manager > Protocols > IP > Static Routes

Default: 16

Options: 1 to 16

Function: Specifies a weighted value (from 1 to 16, with 16 being the most preferred) that

the IP router uses to select a route when its routing tables contain multiple routes

to the same destination.

Instructions: Enter a value from 1 to 16 for this static route. To configure a black hole static

route, enter the maximum preference value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.8

Parameter: Unnumbered CCT Name

Path: Configuration Manager > Protocols > IP > Static Routes

Default: None

Options: A valid circuit name

Function: Specifies the local router circuit associated with the static route over an

unnumbered interface.

Instructions: An entry for a route using an unnumbered interface must include the circuit

associated with the interface. Use this parameter to specify that circuit name.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.11

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 307 308

Pas de commentaire

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur Page 229