Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur Page 207
- Page / 308
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Site Manager Parameters
308628-14.00 Rev 00
A-31
Parameter: Broadcast Address
Path: Configuration Manager > Protocols > IP > Interfaces
Default: You specified the broadcast address when you added IP to the circuit.
Options: 0.0.0.0 or any IP address
Function: Specifies the broadcast address that the IP router uses to broadcast packets.
Accepting 0.0.0.0 for the broadcast address specifies that the IP router will use a
broadcast address with a host portion of all 1s. Accepting 0.0.0.0 does not
configure the router to use the address 0.0.0.0 to broadcast packets. For
example, if you have set the IP address to 123.1.1.1 and the subnet mask to
255.255.255.0, accepting the default value 0.0.0.0 configures the IP router to use
the address 123.1.1.255 to broadcast packets. For the explicit broadcast address
of all 1s, enter 255.255.255.255 for this parameter.
Instructions: Accept the default, 0.0.0.0, unless the calculated broadcast address (host
portion) of all 1s is not adequate. If this is the case, then enter the appropriate IP
broadcast address in dotted-decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.9
Parameter: Cost
Path: Configuration Manager > Protocols > IP > Interfaces
Default: 1
Options: 1 to the value of the RIP diameter (maximum 127)
Function: Sets the cost of this interface. The interface cost is added to routes learned on
this interface through RIP and is specified in subsequent RIP packets
transmitted out other interfaces.
Instructions: Enter the interface cost value (standard RIP implementation assigns a cost of 1);
however, keep in mind that increasing this value causes the upper bound set by
the RIP Network Diameter parameter to be attained more rapidly.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.8
- Configuring IP Exterior 1
- Gateway Protocols (BGP and 1
- Trademarks 2
- Statement of Conditions 2
- Contents 5
- 308628-14.00 Rev 00 10
- 308628-14.00 Rev 00 11
- Before You Begin 15
- Text Conventions 16
- Set Trap Monitor Filters 17
- Acronyms 18
- Hard-Copy Technical Manuals 19
- How to Get Help 20
- Chapter 1 21
- Border Gateway Protocol (BGP) 23
- BGP Concepts and Terminology 24
- Peer-to-Peer Sessions 25
- Interior BGP Routing 26
- IBGP Route Reflector 27
- Equal-Cost Multipath 28
- BGP Updates 28
- Path Attributes 29
- BGP/OSPF Interaction 30
- BGP-4 Confederations 30
- BGP Implementation Notes 31
- Chapter 2 33
- <mask> 34
- Starting BGP 35
- Chapter 3 37
- Deleting BGP from the Router 39
- Starting EGP 40
- Deleting EGP from the Router 42
- Customizing EGP 42
- Next-hop address 0 44
- Next-hop mask 0 44
- Chapter 4 45
- The IP global prompt appears 46
- Defining a Static Route 53
- Chapter 5 59
- Enabling and Disabling BGP 60
- Supplying a BGP Identifier 62
- Identifying the Local AS 63
- Enabling Multihop Connections 69
- Configuring BGP as a Soloist 72
- Best-Route Selection 86
- <name> 91
- Chapter 6 95
- Negotiating the BGP Version 100
- Keeping the Connection Alive 101
- Using the BCC 102
- Using Site Manager 102
- Specifying a Holddown Time 104
- Setting the Route Echo Switch 110
- Chapter 7 117
- Defining a BGP Accept Policy 118
- Using Site Manage 126
- (continued) 129
- (continued) 131
- Chapter 8 141
- Configuring a Route Reflector 141
- Configuring an RR Client 149
- 2.2.2.3): 150
- Chapter 9 153
- Chapter 10 163
- Customizing EGP Services 163
- EGP Concepts and Terminology 164
- EGP Implementation Notes 167
- Customizing EGP on the Router 168
- Supplying a Local AS Number 169
- Configuring a Neighbor 170
- Specifying the Gateway Mode 172
- Choosing the Acquisition Mode 174
- Choosing the Poll Mode 175
- Setting Neighbor Timers 176
- Appendix A 177
- Site Manager Parameters 177
- BGP Configuration Parameters 178
- BGP Global Parameters 178
- BGP-3 Global Parameter 186
- BGP-4 Global Parameter 186
- BGP Peer Parameters 186
- BGP Event Message Parameters 198
- EGP Parameters 200
- EGP Neighbor Parameters 201
- IP Parameters 204
- IP Interface Parameters 206
- IP Global Parameters 220
- Static Route Parameters 227
- Adjacent Host Parameters 230
- Appendix B 235
- Routing Policies 235
- Appendix C 289
- Commands 296
- Regular Expression Symbols 300
Produits connexes et manuels pour Logiciel Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)
Logiciel Avaya CS1000 Manuel d'utilisateur
(456 pages)
(456 pages)
Logiciel Avaya Business Communication Manager 5.0 - Configuration - Devices Manuel d'utilisateur
(258 pages)
(258 pages)
Logiciel Avaya PeriReporter Manuel d'utilisateur
(122 pages)
(122 pages)
Logiciel Avaya PeriProducer 3.00 (Software Release 3.00) - Business Communications Manager Avis
(48 pages)
(48 pages)
Logiciel Avaya Business Communications Manager - Intelligent Contact Center Manuel d'utilisateur
(258 pages)
(258 pages)
Logiciel Avaya BCM50 Guide de configuration
(568 pages)
(568 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels