Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manuel d'utilisateur Page 228

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 308
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 227
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-52
308628-14.00 Rev 00
Parameter: Address Mask
Path: Configuration Manager > Protocols > IP > Static Routes
Default: None
Options: Based on the network class of the IP address you specified at the Destination IP
Address parameter
Function: Specifies the subnet mask of the destination network. Specifies the supernet
mask of the supernet for which you want to configure a black hole static route.
Instructions: Enter the subnet or supernet mask in dotted-decimal notation. To configure a
default route, enter 0.0.0.0. To configure a black hole static route, enter a
supernet mask.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.4
Parameter: Cost
Path: Configuration Manager > Protocols > IP > Static Routes
Default: 1
Options: 1 to the value of the RIP Diameter parameter (maximum 126)
Function: Specifies the number of router hops a datagram can traverse before reaching
the destination IP address. The IP router uses the cost value when determining
the best route for a datagram to follow.
Instructions: Enter the number of router hops.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.5
Parameter: Next Hop Addr
Path: Configuration Manager > Protocols > IP > Static Routes
Default: 0.0.0.0
Options: Any valid IP address
Function: Specifies the IP address of the next-hop router. Defines a black hole route for a
supernet.
Instructions: Enter the IP address in dotted-decimal notation. To configure a black hole
static route, enter 255.255.255.255. If you are configuring a static route to an
unnumbered interface, enter 0.0.0.0.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.6
Vue de la page 227
1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 307 308

Commentaires sur ces manuels

Pas de commentaire