Avaya Configuring Dial Services Manuel d'utilisateur Page 219

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 326
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 218
Configuring Backup Circuits
114062 Rev. A 9-23
CCITT Annex A provides user-side management services as specified by
the ITU-T (formerly CCITT).
LMI Switch offers limited management services for the DCE side of the
connection as specified by Revision 1 of the Local Management Interface
Standard.
Annex D Switch provides limited management services for the DCE side
of the connection as specified in Annex D to ANSI standard T1.617-1991.
Annex A Switch provides limited management services for the DCE side
of the connection as specified by the ITU-T.
Instructions: Select the management protocol for the Frame Relay network. The LMI
Switch, Annex D Switch, and Annex A Switch options are primarily for
troubleshooting.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.1.1.6
Parameter: Address
Default: ADDR Q922
Options: ADDR Q922
| ADDR Q922 November 90 |
ADDR Q922 MARCH 90 | ADDR Q921
Function: Specifies the DLCI addressing type.
ADDR Q922 selects addressing as specified in the final version of the
Q.922 standard. Q.922 provides for FECN, BECN, DE, and EA bits.
While most Q.922 addresses are included within a 2-octet field, the
standard allows for 3- and 4-octet address fields.
The November draft of ADDR Q922 differs from ADDR Q922 in
dropping the D/C bit from the extended (3- and 4-byte) forms.
The March draft of ADDR Q922 differs from ADDR Q922 in defining an
11-bit DLCI and dropping the DE bit from the second octet of the address
field.
ADDR Q921 differs from ADDR Q922 MARCH 90 in that it does not use
FECNs or BECNs.
Instructions: Select the addressing type for the Frame Relay interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.1.1.8
Vue de la page 218
1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 325 326

Commentaires sur ces manuels

Pas de commentaire