Avaya Configuring Dial Services Manuel d'utilisateur Page 125

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 326
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 124
Creating Line Pools
114062 Rev. A 7-27
Parameter: Signal Level (dB)
Default: 0.0 dB
Options: -15 dB
| -7.5 dB | 0.0 dB | 0.5 dB | 0.8 dB | 1.1 dB | 1.5 dB
Function: Specifies the T1 transmit power level in decibels (dB).
The DS1 values of -15 and -7.5 dB are long-haul and the carrier
determines these values if 0.0 dB is not sufficient.
The DSX1 values of 0.0, 0.5, 0.8, 1.1, and 1.5 dB are short-haul and
correlate with cable length as follows:
Instructions: Specify the decibel level according to the length of the cable or as the
carrier specifies.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.3.1.6
Parameter: Setup Alarm Threshold (seconds)
Default: 2 seconds
Range: 2 to 10 seconds
Function: Specifies the time interval during which MCT1 tolerates a performance
defect or anomaly. If the performance defect or anomaly is still present
when this time interval expires, MCT1 records a performance failure and
logs an event message.
Instructions: Set the timer value.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.3.1.7
0.0 dB 0 to 133 ft
0.5 dB 133 to 266 ft
0.8 dB 266 to 399 ft
1.1 dB 399 to 533 ft
1.5 dB 533 to 655 ft
Vue de la page 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 325 326

Commentaires sur ces manuels

Pas de commentaire