Avaya S8710 Manuel d'utilisateur télécharger pdf (Page 87)

AAccessing the media server

Network configuration

Installing and Configuring the Avaya S8700 or S8710 Media Server 87

June 2004

Network configuration

NOTE:

Write down the original settings in case you need to change them back.

A new network connection must be configured as follows:

NOTE:

These instructions are for Windows 2000/XP only.

1 On your computer desktop, right-click My Network Places and left-click Properties to display

the Network Connections window.

Windows 2000/XP should have automatically detected the Ethernet card in your system and

created a LAN connection for you. More than one connection may appear.

2 Right-click on the correct Local Area Connection and left-click Properties to display the Local

Area Connection Properties dialog box.

3 Select Internet Protocol (TCP/IP).

4 Click Properties to display the Internet Protocol (TCP/IP) Properties dialog box.

5 On the General tab, select Use the following IP address. Enter the following:

• IP address: 192.11.13.5

• Subnet mask: 255.255.255.252

Make a note of any IP addresses or other entries that you have to clear. You may need to restore

them later to connect to another network.

6 Select Use the following DNS server addresses. The entries for Preferred DNS server and

Alternate DNS server should both be blank.

7 Click Advanced at the bottom of the dialog box to display the Advanced TCP/IP Settings dialog

box.

8 Click the DNS tab. Make sure no DNS server is administered (the address field should be blank).

9 Click OK, OK, and Close to close all the windows.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 95 96

Pas de commentaire

Avaya S8710 Manuel d'utilisateur Page 87