Avaya S8710 Manuel d'utilisateur télécharger pdf (Page 18)

1 Introduction

Equipment specifications

18 Installing and Configuring the Avaya S8700 or S8710 Media Server

June 2004

Before you start the installation

The pre-installation team should have done the following tasks. If they were not all done, do not continue

with the installation.

• Verify that the open, customer-supplied, EIA-310D (or equivalent) standard 19-inch (48-

centimeter) equipment racks are properly installed and solidly secured. Make sure that the screws

that come with the racks are there. The S8700 Media Server requires a 2-post rack. The S8710

Media Server requires a 4-post rack. If using a rack cabinet, make sure it has adequate ventilation.

• Verify that the rail kit to support the S8710 Media Server are available for installation.

• Verify that the rail kits, required to support the very heavy UPSs, are installed on the rack or

available for installation. For information on installing the rails, refer to the documentation that

comes with the rail kits.

• Verify that the equipment rack(s) is(are) grounded per local code. See Job Aid: Approved Grounds

(555-245-772).

• Verify that the customer provides AC power to the rack from a nonswitched outlet.

• Verify that cabling for the TN2312BP Internet Protocol Server Interface (IPSI) circuit packs is

labeled and run from the control hardware rack to the port networks or that appropriate

connectivity is provided.

• Verify that you have all the equipment on site. See Table 3, List of required hardware, on page 20

for the list of required hardware.

Equipment specifications

The media server control network components consist of two media servers, one or two Ethernet

switch(es), and two UPSs. See Table 1, Control network components specifications,

on page 18.

The internal room temperature must not exceed 104° F (40° C).

Table 1: Control network components specifications

Component

Dimensions

Weight (lb/kg)English (in.) Metric (cm) Us (height in rack)

Media Server

S8700

S8710

3.5h x 17d x 17w

3.4h x 26d x 17.5w

9h x 43d x 43w

8.6h x 66d x 45w

25/11

60/27

Ethernet Switch:

P133G2/P134G2

P333T/334T

3.5h x 14d x 19w

3.5h x 18d x 19w

9h x 35d x 48w

9h x 45d x 48w

11,13/5,6

16.5/7.5

UPS:

700 VA

1500 VA

3.5h x 19d x 17w

3.5h x 24d x 17w

9h x 48d x 43w

9h x 30d x 43w

34/15

50/23

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Avaya S8710 Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Avaya S8710