Avaya BSGx4e CLI Guide de l'utilisateur télécharger pdf (Page 37)

3 Configuration commands DHCP server command

NN47928-107 37

dhcps vendorclass

Use this command to configure the options according to the vendor class

identifier sent by a client. The vendor class can be refined by giving an

interface; in this case the options are only applied if both the vendor class

identifier and interface match the incoming DHCP request.

Syntax config dhcps vendorclass <id> vendorclass <id> interface

[eth0|eth1|none] optiongroup <name>

Parameters id Enter a unique identification for this

vendorclass. Enter new for the next sequential

ID to be automatically assigned or assign an ID

by entering a number. Enter show dhcps

vendorclass to view all assigned IDs.

vendorclass id Enter the vendor class reported by the client.

interface eth0|eth1|none

Specify the interface.

optiongroup name Enter the name of a group of options to be sent

to the client with its IP address. This name is

specified in dhcps option

Example > config dhcps vendorclass new Interface eth1 OptionGroup 1

commands

display dhcps vendorclass

del dhcps vendorclass

show dhcps vendorclass

show dhcps group

show dhcps option

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 183 184

Pas de commentaire

Avaya BSGx4e CLI Guide de l'utilisateur Page 37