Avaya 4600 Series IP Telephones Note d'application télécharger pdf (Page 5)

SZ; Reviewed:

WCH 11/24/2004

Solution & Interoperability Test Lab Application Notes

5 of 23

Aruba-wireless.doc

3. Configure the Aruba 5000 and 2400 Wireless LAN

Switches

The switch configuration can be done using either a web-based interface or a command line

interface (CLI). The following sessions display the configuration using CLI. For web-based

configuration, refer to the Aruba 5000 and 2400 switch configuration guide. The Aruba 5000

switch is configured as a master switch and the Aruba 2400 is configured as a remote switch.

3.1. Configure Aruba 5000 Wireless LAN Switch

Step Description

Enter command configure t from the switch console to get into the configuration mode.

Note: Since there is significant system control information exchanged between the master and

remote switches, it is recommended to have a separate VLAN to carry this traffic instead of

sharing the VLAN with VoIP traffic. In this configuration, VLAN 4000 was created for this

purpose.

 Configure VLAN, Port Tagging

VLAN 4 -- create VLANs in the master switch

VLAN 4000

interface fastethernet 2/0 -- switch port connected to the Extreme Switch

trusted

switchport mode trunk

switchport trunk allowed VLAN 4

interface fastethernet 2/1 -- switch port connected to the IP Telephone

trusted

switchport access VLAN 4

spanning-tree portfast

interface fastethernet 2/2 -- switch port connected to the AP

trusted

switchport access VLAN 4000

 Configure VLAN interface, IP address and Default Gateway

interface VLAN 4

ip address 10.4.4.2 255.255.255.0

interface VLAN 4000

ip address 172.16.2.1 255.255.255.0

interface loopback

ip address 10.4.4.3 255.255.255.0

ip default-gateway 10.4.4.1

1 2 3 4 5 6 7 8 9 10 ... 22 23

Pas de commentaire

Avaya 4600 Series IP Telephones Note d'application Page 5