Avaya 4600 Series IP Telephones Note d'application télécharger pdf (Page 21)

SZ; Reviewed:

WCH 11/24/2004

Solution & Interoperability Test Lab Application Notes

21 of 23

Aruba-wireless.doc

o Layer 2 and Layer 3 QoS (CoS and DiffServ) for Avaya IP wireless endpoints.

o 802.1x authentication, RADIUS support and WEP encryption.

o Layer 2 and Layer 3 roaming.

o Client management, monitoring and debug functionality.

The serviceability and performance tests were also performed manually. The performance tests

were executed with the aid of automated data traffic load. The quantified measurements of the

VoIP data were obtained via a VoIP testing script.

6.2. Test Results

All tests were completed successfully.

7. Verification Steps

The following verification steps were used in these Application Notes to verify correct system

operation:

1. Verify network connectivity by launching pings between the different endpoints.

Verify that all pings are successful.

2. Power cycle IP Telephones and verify that they can get an IP address and other

configuration parameters from the DHCP server. Verify they can register with the

S8500 Media Server.

3. Power up all Avaya IP Wireless Telephones and verify that all IP Wireless

Telephones can register with the S8500 Media Server.

4. Launch IP Softphones and verify that they can register with the S8500 Media Server.

5. Make calls between the different phones and verify that the voice quality is good.

6. Enable 802.1 x authentications on both 5000 and 2400 switches. Verify that the

Odyssey RADIUS Server can authenticate the IP Softphones.

7. Enable WEP on IP Wireless Telephones and verify you can place calls and that the

voice quality is good.

8. Make a conference call among different types of phones and that all parties are

conferenced and voice quality is good.

1 2 ... 16 17 18 19 20 21 22 23

Pas de commentaire

Avaya 4600 Series IP Telephones Note d'application Page 21